Submersible Pool Light with 13 LED Beads
Hurry! – Only 461 left in stock.
Tips for you
Tips for LED Light
1.Make sure the sealing ring is undamaged, and properly stay in the groove.
2.Twist the light until it can not be twisted any further before putting underwater.( Very Important!!! otherwise it will leak)
3.Make the light dry before replacing battery. Otherwise the water may drop into lights and it will damage the components of the lights.
Tips for RF Remote Control
1.Please remove the plastic insulating film on the bottom of remote before using it
2.Long press the button "ON" of the remote for about 2 second to activate all the lights.
3.Low Battery Checking: Press the button "B", if it's no or very weak light, it means low battery, then you need replace the battery. Low power will weaken the sensitivity of remote.
Tips for Suction Cups
1.Suction cup can be used in both air and underwater on flat and smooth surfaces. But not work on rough surface.
2.Please clean the surface before attaching, make sure there is not any stuff between the surface and suction cup, especially remember to remove the lubricant like shower cream, moss etc. ( very Important!!!)
Tips for Magnet
1.LOFTEK magnet can work for any iron place which can be attracted by magnet, especially rough vertical surface, but not for smooth vertical surface, please use suction cup instead.
2.The magnet is strong, but it's better to apply on pure iron surface, alloy may reduce the absorb effect.
People Also Bought
Average
0
0 review
- 5 stars
- 4 stars
- 3 stars
- 2 stars
- 1 stars
- with photos
- with replies
- All
- sort by latest
- sort by oldest
You may also like these products
QUESTIONS & ANSWERS
Ask a Question-
Does the timer set the lights to turn off after 6 hours and stay off? Or does it set the lights to turn off for 6 hours then on for 6 hours then off again etc. Additionally, the description says there is a 24 hour timer option, however this is not displayed in the image. Does this come with the 24 hour option? Additionally, does the light last 20 hours on the highest brightness setting, or the lowest?
Hi, there, thanks for reaching out! The timer function will be like this:
Press the 2H button the light will keep on for 2 hours it will turn off automatically (be off 22 hours), after 22 hours, the light will turn on automatically again, and keep on for 2 hours ......cycle again in 24 hours (until
the battery powers off ). 24 hours is the circle time, the light can light up to 35-50 hours, so if last 20 hours is the brightness between the highest and the lowest. Know more here: https://bit.ly/3uxvLWDIf you still have questions, please send us an email at sales@loftek.us
-
Why does remote only work above water surface? Works when lights are out of water... does not work when light are under water.
Since you can control the light with remote above water surface, which means there is no problem with your lights and remotes.
But there is a control distance for the light and remote, which is 200ft/61m in air, 16.4ft/5m in water. Please make sure your control is within the distance. -
Do you have replacement suction cups?
Yes, we have, you can find them here: https://www.loftek.us/collections/led-accessories/products/silicone-suction-cups
-
i got the 4 pack and want to put them in garden but use different colors on each, but it seem i can only set it on one color?? is there any way to set each one at a different coler?
Yes, there are several colors for your option. You can use the remote to set for each one.
-
i have a set of these and set them on a timer,, this morning there all flashing red what does this mean? low batteries?
Yes, you're right, it's time for changing the batteries.
